Skip to main content
Notice:

Welcome to the new bcogc.ca. We look forward to receiving your comments via the Website Feedback button to the right below.

Can't find what you're looking for? Access the old website using this link.

Well Testing

Name Date Published
Observation Well Application Guide
The Observation Well Application Guide provides specific information on what needs to be included in an application to apply for an observation well.
Effective Date: Nov. 5, 2018
Nov. 7, 2016
Pressure ASCII Standard (PAS) – Reference Guide
Sep. 10, 2014
Table 1: Pools with Non-Annual Pressure Survey Approval
Table 1: Pools with Non-Annual Pressure Survey Approval provides a listing of pools that have received approval to test on non-consecutive years or exempt from further testing.
Effective Date: Apr. 1, 2019
May 18, 2005
Table 3: Estimated Gas Gradients by Pressure Range
Table 3: Estimated Gas Gradients by Pressure Range provides expected gas gradient values to correct recorder run depth pressures to mid-point of perforations.
Effective Date: Mar. 1, 2013
Jun. 23, 2005
Table 4: Estimated Water Gradients by Salinity
Effective Date: May 1, 2014
Apr. 1, 2014
Well Fluid Analyses - Sampling and Reporting Requirements Guide
This document was developed by the Commission's Reservoir Engineering department after conducting compliance on fluid analyses, based on questions and feedback received from permit holders.
Effective Date: Jun. 1, 2019
May 8, 2019
Well Testing and Reporting Requirements Guide (v2.3)
The Well Testing and Reporting Requirements Guide provides an explanation of the regulatory requirements.
Effective Date: Jun. 25, 2020 - Updated Section 1.6, DFITs, to provide more clarity about the submission types used for DFITs. Also updated Section 2.2 Commingled Flowback, aligned with the BC Measurement Guide.
Sep. 2, 2011

Looking for Reservoir Management Data & Notices?

Find the latest Approvals, Notices and Reserves documents in the Data & Reports section.

Go to Data & Reports

Website Feedback